Spatial engineering

Q: 3. Pay the application fee

The application fee is PLN 85, i.e. about EUR 20. Payment of the application fee may be carried out in two ways: IN THE ADMISSION SYSTEM – the online payment option can be found in the top left corner in the “Receivables” section, where you can click on the link “pay online”. TRADITIONAL BANK TRANSFER – transfer details: Account owner / recipient: Politechnika Morska w Szczecinie (Maritime University of Szczecin) Address - first line: ul. Wały Chrobrego 1-2 Address - second line: 70-500 Szczecin, Polska (Poland) Name of the bank: Bank Pekao SA VII O/Szczecin Bank account number: 91 1240 3927 1111 0011 0575 2658 IBAN: PL 91 1240 3927 1111 0011 0575 2658 SWIFT: PKOPPLPW Transfer title: „Opłata rekrutacyjna Your name and surname” If you decide to make a traditional bank transfer, please note that we will verify your online application form only after receiving the transfer at our bank. In this case we recommend sending a confirmation of the transfer in PDF form to the following address: international@pm.szczecin.pl. So if you want to have your online application form to be verified as quickly as possible, we recommend online payment.

Q: Studies free of charge or at a lower tuition fee rate

For whom? foreigners who have been granted a permanent residence permit in Poland; oreigners who have been granted a refugee status in Poland; foreigners who have been granted a temporary protection in Poland; foreigners who are migrating workers and nationals of the EU, Switzerland, Iceland, Norway or Lichtenstein or family members of such workers and who reside in Poland; foreigners who have been granted a European Community long-term residence permit; foreigners who have been granted a temporary residence permit in Poland with regard to situations laid down in Art. 127 (a temporary stay permit to perform work in a profession requiring high qualifications), Art. 159.1 (a temporary stay permit to reunite with one’s family) or Art. 186.1.3 or 186.1.4 (a European Community long-term residence permit issued by another EU member state or being a member of such resident) of the Act of 12 December 2013 on Aliens (Journal of Laws 2013 item 1650); foreigners who have been granted a subsidiary protection in Poland; foreigners who are nationals of an EU member state, Switzerland, Iceland, Norway or Lichtenstein and holders of a permanent stay permit; foreigners holding a certificate of Polish language proficiency at level C1 issued by https://certyfikatpolski.pl foreigners who are holders of the Polish Card (Karta Polaka) or who have been issued a decision confirming their Polish origin; foreigners residing in Poland who are spouses, ascendants (i.e. parents/grandparents) or descendants (i.e. children/ grandchildren) of a Polish citizen.

Q: Studies at a full rate of tuition fees

All other foreigners not listed in point A. If you are Polish, click here

GENERAL INFO

Spatial Modeling

Faculty: Faculty of Computer Science and Telecommunications
Type of studies: Undergraduate
Language: Polish
Duration: 3.5 years – 7 semesters
Mode: Full-time studies
Degree: Engineer

Recruitment dates: May – July

Spatial Modeling

Spatial Modeling is a program for those interested in modern industrial technologies such as 3D printing, prototyping, and reverse engineering. Students gain a solid foundation in spatial modeling and additive manufacturing technologies used in industries like automotive, medical, aerospace, and consumer electronics. The curriculum combines technical knowledge with hands-on practice, preparing graduates for work in the rapidly evolving Industry 4.0 sector. This degree is for those who want to create innovative solutions and have a real impact on the future of technology

What you will learn:

Students acquire practical skills in working with 3D printing using metals, resins, and polymers, as well as CNC machining. They learn how to design in industry-standard software and collaborate in teams using cloud-based tools. The program offers opportunities to earn internationally recognized certificates and unique market-relevant qualifications. Graduates will be ready to tackle real engineering challenges in cutting-edge sectors of the industry.

Specializations

In the second semester, students choose one of two specializations:

3D Printing Engineering
Industrial Design

Graduate profile:

A graduate in Spatial Modeling is a specialist ready to work in modern industry, combining technical expertise with a creative approach to design. Depending on the chosen specialization:
– 3D Printing Engineering – graduates are skilled in additive manufacturing with metals, plastics, and resins, proficient in CAD/CAM tools, and experienced in CNC machining.
– Industrial Design – graduates combine engineering knowledge with design thinking to create functional and visually appealing products using digital modeling tools.

They are prepared for teamwork, problem-solving, and implementing innovative solutions across sectors such as automotive, medical, aerospace, electronics, and other Industry 4.0-driven industries.

Why is it worth it?

This is a forward-looking degree that combines cutting-edge technology with in-demand practical skills. You’ll learn what the market actually needs: 3D printing, design, modern tools, and teamwork. You’ll earn certificates that open doors to exciting careers in fast-growing industries driven by Industry 4.0.

Employment opportunities:

1. Additive Manufacturing Engineer – Designs and implements 3D printing technologies in industrial production.

2. CAD/CAM Designer – Creates 3D models and technical documentation for machining and additive manufacturing.

3. Prototyping Engineer – Develops and tests product prototypes from concept to functional models.

4. Reverse Engineering Specialist – Digitally reconstructs physical objects using scanning and modeling techniques.

5. Product Designer – Designs functional and attractive industrial products with a focus on technology and usability.

6. Additive Manufacturing Technologist – Selects materials and parameters for 3D printing and ensures production quality.

7. Industry 4.0 Implementation Specialist – Helps companies adopt digital production technologies, including 3D printing and automation.

Entry requirements

There are no entry examination in Maritime University of Szczecin.

Meeting the following basic criteria is obligatory for all applicants:

Must hold a previous education certificate giving him/her a right to apply for admission to a selected cycle of higher education:

Upper secondary school leaving certificate giving its holder a right to apply for admission to undergraduate higher education programmes in the country in which he or she completed secondary school or which may give the holder such right in Poland on the basis of an administrative decision or an international agreement.
undergraduate diploma granting access to graduate higher education programmes in the country in which its holder completed his/her education.

Must submit all necessary application documents (the list of them is available on this webpage: generator.marine-edu.com, including:

Document confirming the fluency in English at B2 level (for programmes delivered in English) or a document confirming the fluency in Polish at B1 level (for programmes delivered in Polish).
In case of candidates applying to sea-going degree programmes, a Medical Certificate for Service at Sea/ Medical Fitness Certificate for Seafarers compliant with STCW and MLC 2006.

Must pay the admission fee (PLN 85)

Legal basis for admissions of international candidates: MUS Rector’s Order No 6/2024 on detailed conditions, procedure and date of commencement and termination of international admissions in the academic year 2023/2024 (document in Polish language).

If you have any question, check our FAQ – it may have already been answered there.

Learn Polish!

Candidates who are granted preliminary admission to our university can particiapate in our one-month summer course of the Polish language (140 hours). The course is dedicated only to candidates to our University whose Polish language proficiency is at least at A1 level. It is an intensive course which supports individual learning towards a B1 exam. Intensive classes are scheduled 5 days a week for an average of 6 hours per day.

Summer course of the Polish language

BASIC INFORMATION:

classes: 140 hours (1 hour lesson = 45 minutes)
time: 20 August – 24 September 2024
format: classroom course in Szczecin
price: PLN 1800
level: mandatory entry level at least A1, expected output level A2/B1

DETAILS:

The course is dedicated only to persons admitted to the Maritime University of Szczecin as first year students. It is an excellent opportunity to meet new fellow students.

The course consists of 140 hours of classes over the period of one month. According to the Polish education system, each class hour lasts for 45 minutes. Classes are held from Monday to Friday, 6 hours a day on average.

The curriculum includes Polish grammar and vocabulary, classes dedicated to developing spoken and written communication skills as well as listening and reading. The course also includes vocabulary related to marine profession, transport, logistics, and exact sciences, such as maths and physics. Classes are taught by qualified and experienced teachers.

PRICE

The total cost of the course is PLN 1800. The price includes costs of teaching materials. It does not include accomodation costs.

ACCOMMODATION

Accommodation is possible for course participants in our Student Campus (dormitories KORAB and PASAT) at about 20PLN per day.

HOW TO REGISTER?

Candidates with prelimiary admission who would like to take a Polish language course should complete the following steps:

By 31 July 2024 fill in the application form at: https://mec.pm.szczecin.pl/pl/kursy-jezykowe/jezyk-polski/kurs-jezyka-polskiego-i-rok/
Pay the required amount to the account you will receive in an email from our university. The course fee is has to be paid before the start of the course.

IMPORTANT INFORMATION!

The proposed course is meant as supplementary aid to students’ autonomous language learning and does not prepare the participants to a B1 exam (it only brings them to A2/B1 level). Therefore, we encourage all participants to study Polish language independently – to invest in a good dictionary, watch Polish movies, or listen to Polish music.

EXAM

The exam is obligatory for all international students who are not able to submit any of the documents we accept as proofs of Polish language proficiency (e.g. a state certificate confirming their proficiency in the Polish language or graduation diploma from a school with Polish languge of instruction).

The exam will be held on 26 (written part) and 27 (oral part) September 2024. The retake exam will be carried out between 14-18 October 2024.

Application step by step

1. Collect the required documents

If you have already chosen your programme, the first step you should take is to prepare your application documents. The list of them depends, among others on your citizenship and the chosen programme. To find out which documents are required in your case, click on the link to our generator of the list of required application documents. It is a simple form with eight questions. After answering and approving them, you will get a list of attachments required in your situation along with a description of how to prepare them.

DOCUMENTS UNDERGRADUATE

DOCUMENTS GRADUATE

Please note that if you click on the description of the selected programme, than at the very bottom of the description you will also find a link to the above generator but with fewer questions. It is just because in this case you will not have to answer questions about your chosen programme.

2. Complete the online application form

The next step is to complete the online application form in our admission system.

APPLY NOW

But before you start to fill it in, you need to prepare:

Good quality scans of your documents (attachments) referred to in step 1
Please note that if your tailor-made list of required documents includes e.g. 3 documents, then you should prepare 3 files (e.g. secondary school leaving certificate and its translation should be attached in one file). One file can be a maximum of 20 MB.
Your photo in JPG or PNG format.
The maximum size of your photo is 5 MB. The minimum size of the photo is 236px x 295px. The photo should be the same as for the passport / ID card.

After entering the online admission system, you must register your account . The e-mail address you provide during registration is very important, because to this address we will send you notifications about any mistakes or gaps in your application, and notifications about the change in the status of your application.

After registering your account provide all the data required in the admission system . The online admission system will guide you through all stages divided into smaller steps. Among others, you will have to provide your personal data, choose the programme, define your legal status and complete a questionnaire in which you will provide us with information about how you learned about our offer. Then you will be redirected to the page where you can pay the application fee.

Remember that at this stage:

You must download admission application, print it, sign it, scan it and attach it in the online admission system, in the same place as the other scans of your documents.

You must complete your grades in the admission system , if you have not already done so. To do this, click in the top left corner on “My applications”, and then on the “Add grades” icon.

You must attach scans of your documents. Being logged in to the online admission system, click again in the top left corner on “My applications”, and then on the “Attachments” icon.

3. Pay the application fee

The application fee is PLN 85, i.e. about EUR 20. Payment of the application fee may be carried out in two ways:

IN THE ADMISSION SYSTEM – the online payment option can be found in the top left corner in the “Receivables” section, where you can click on the link “pay online”.
TRADITIONAL BANK TRANSFER – transfer details:

Account owner / recipient: Politechnika Morska w Szczecinie (Maritime University of Szczecin)
Address – first line: ul. Wały Chrobrego 1-2
Address – second line: 70-500 Szczecin, Polska (Poland)
Name of the bank: Bank Pekao SA VII O/Szczecin
Bank account number: 91 1240 3927 1111 0011 0575 2658
IBAN: PL 91 1240 3927 1111 0011 0575 2658
SWIFT: PKOPPLPW
Transfer title: „Opłata rekrutacyjna Your name and surname”

If you decide to make a traditional bank transfer, please note that we will verify your online application form only after receiving the transfer at our bank. In this case we recommend sending a confirmation of the transfer in PDF form to the following address: international@pm.szczecin.pl. So if you want to have your online application form to be verified as quickly as possible, we recommend online payment.

4. Deliver documents to our university

The final stage of the admissions is the delivery of application documents to the Maritime University of Szczecin.

If you are applying for a degree programme delivered in English you do not need to provide us with paper documents at the admission application stage, but they will be required immediately after your arrival in Poland.

If you are applying for a degree programme delivered in Polish, at the admission stage you must provide the required documents online by uploading them in the admission system. The complete set of hard copy documents will only be required if you are selected for admission. You will be informed about the deadline for delivering these documents in an email we will send to you after the admission process.

The address for delivering your documents is as follows:

Politechnika Morska w Szczecinie (Maritime University of Szczecin)
Dział ds. Obcokrajowców i Wymiany Międzynarodowej
ul. Wały Chrobrego 1-2
70-500 Szczecin
POLSKA (Poland)

NOTE: If you live nearby Poland and apply for a short-term visa in order to come to Poland during the admissions period, than the certificate of participation in the admissions at the Maritime University in Szczecin you will obtain in the International Students & Mobility Office. Before that, however, you must:

Complete the online application form in the admission system,
Attach in the online admission system at least the scan of the secondary school leaving certificate (or a first-cycle diploma)
Pay the application fee.

If you meet the above-mentioned conditions, send us an e-mail to the following address: international@pm.szczecin.pl with a request to issue such a certificate. However, remember that coming to Poland during the admissions period is not necessary.

Language requirements

To study in the Maritime University of Szczecin you are required to know Polish or English language at B2 level (for programmes with Polish or English language as the language of instruction respectively).

OFFICIAL DOCUMENTS:

list of documents accepted as evidence of ENGLISH language proficiency at B2 level is available >>> here <<<

list of documents accepted as evidence of POLISH language proficiency at B2 level is available >>> here <<<

Disclaimer: the above lists are based on the draft Regulation of the Minister of Science and Higher Education of 9 May 2025 on the types of documents certifying proficiency in the language of instruction. The Regulation is expected to be passed by the end of June 2025. Until then, the Maritime University of Szczecin is not in a position to provide definite information on which language documents can be taken into account in the 2025/2026 admissions process and cannot be held accountable for any changes thereof.

Fees and tuitions

Annual fees:

All tuition and study payments at the Maritime University of Szczecin should be paid in PLN. The below PDF files contain all detailed information about tuition fees (per year) for degree programmes offered in Polish and English language at the Maritime University of Szczecin (MUS).

Undergraduate Tuition fees

Studying in English language

Currently, Maritime University of Szczecin delivers only few degree courses in English language (they are highlighted in the above PDF file). Please, pay attention to the fact that the price for EU citizens and holders of the Polish Card is greatly reduced as they are treated equally with Polish citizens. Foreigners from outside the European Union who are not holders of the Polish Card have to pay the full tuition fee.

Additional costs for students of the seagoing programs

Students of Navigation, Mechanical Engineering, Mechatronics and Inland Shipping have to pay extra for International Medical Certificate for service at Sea: approx. PLN 400 (approx. EUR 90) which is valid for 1 or 2 years depending on the doctor’s decision, and for the Seaman’s registration book: EUR 50 which is a one-time fee. These fees are paid in external institutions, i.e. a medical clinic and the Maritime Office in Szczecin.

Studying in Polish language

Basically, foreign students studying in Poland in Polish language need to pay for their education. However, there are exceptions that exempt from tuition fees the following groups of foreigners studying full-time programmes

The citizens of the European Union (EU)
Holders of the Polish Card (PL: Karta Polaka)
Foreigners who passed the State Certificate Examination in Polish as a Foreign Language at minimum C1 level – examinations held by the State Commission for the Certification of Proficiency in Polish as a Foreign Language.

If you do not belong to one of these groups, you will have to pay for studying at MUS. However, the tuition fees charged by the Maritime University are not high. MUS is a state university which means that, similarly to non-profit organisations, its offer is not strictly commercial.

The annual fees charged by our University depend on the programme (sea-going programmes are more expensive than other, non-sea-going degree courses), the level of study (the undergraduate level is usually more expensive than graduate level as it takes 7 to 8 semesters, whereas graduate level takes only 3 to 4 semesters) and the mode of study (you always have to pay for the part-time programmes but the annual tuition fee depends on your status).

Admission options – check your status

Studies free of charge or at a lower tuition fee rate

For whom?

foreigners who have been granted a permanent residence permit in Poland;
oreigners who have been granted a refugee status in Poland;
foreigners who have been granted a temporary protection in Poland;
foreigners who are migrating workers and nationals of the EU, Switzerland, Iceland, Norway or Lichtenstein or family members of such workers and who reside in Poland;
foreigners who have been granted a European Community long-term residence permit;
foreigners who have been granted a temporary residence permit in Poland with regard to situations laid down in Art. 127 (a temporary stay permit to perform work in a profession requiring high qualifications), Art. 159.1 (a temporary stay permit to reunite with one’s family) or Art. 186.1.3 or 186.1.4 (a European Community long-term residence permit issued by another EU member state or being a member of such resident) of the Act of 12 December 2013 on Aliens (Journal of Laws 2013 item 1650);
foreigners who have been granted a subsidiary protection in Poland;
foreigners who are nationals of an EU member state, Switzerland, Iceland, Norway or Lichtenstein and holders of a permanent stay permit;
foreigners holding a certificate of Polish language proficiency at level C1 issued by https://certyfikatpolski.pl
foreigners who are holders of the Polish Card (Karta Polaka) or who have been issued a decision confirming their Polish origin;
foreigners residing in Poland who are spouses, ascendants (i.e. parents/grandparents) or descendants (i.e. children/ grandchildren) of a Polish citizen.